Applications and Benefits of Syphon Pipes

What are Syphon Pipes

A Syphon Pipes is a device that draws liquid from one area to another. This is done by using a pressure difference between the two areas. The difference is large enough that some water starts to boil and become vapor. The vapor has a lower density than liquid water, so it expands when it reaches a new pressure above atmospheric pressure. The remaining water is kept in the upper chamber. This device is also known as a trap. Traps are not considered true siphons, but they are constructed like U-shaped pipe and allow waste materials to pass through them.

The safety Syphon Pipes are the most effective device for transferring water or liquids safely. The siphon consists of a copper siphon pipe with anti-static properties. It also contains a glass ball and a stainless steel spring. One end of the siphon is submerged in the liquid and the other is attached to two stainless steel vacuum taps. The siphon is then filled with water and the liquid is forced through the tube through gravity.

The siphon height is the vertical distance between the surface of the upper reservoir and the apex of the tube. During our experiments, the siphon height was 1498 cm and rose to 1504 cm. During the experiment, the barometric pressure was 99.8 kPa. A siphon operation is shown in the video sequences 3, 4, and 5. In the video sequence 3, the water is flowing out of the lower siphon leg.

Uses of Syphon Pipes

A Syphon Pipe is a tube in which water is lifted and pulled by a force greater than the weight of the water inside it. This is done because air at either end of the pipe exerts equal pressure on the water molecules. In this way, a syphon can raise water 22 to 24 feet. However, a syphon cannot raise water higher than a conventional pump.

The pipe is inserted into a tank and is placed at a certain height from the surface H. As the water moves upward, the pressure gradually decreases until the water reaches the summit C. The liquid flow then begins once the pressure drops below the atmospheric pressure. Until the liquid reaches a height of about 10 meters, air sustains the water. If there is a vortex over the entrance to the pipe, the liquid flow may be interrupted.

A siphon is an inverted “U” shaped tube that allows liquid to flow upwards from a reservoir to a lower level. When the liquid is forced up the tube, it is under pressure through suction or immersion. Once it is inside, the flow continues unassisted. A siphon is also known as an inverted siphon, trap, or flow tube and is responsible for causing gas explosions in some situations.

Applications of syphon/Siphon pipes:

  1. Steam Boilers: These are used for precise water level measurement in steam boilers and are connected to pressure gauges.
  2. Industrial Processes: Protect pressure instruments from high temperatures in chemical processing plants.
  3. Automotive: Prevent coolant from damaging temperature sensors in automotive cooling systems.
  4. Hydraulic Systems: Measure fluid levels accurately without exposing instruments to full hydraulic fluid force.
  5. HVAC Systems: Measure the pressure of refrigerants accurately while shielding instruments from extreme temperatures.
  6. Water Tanks: Measure water levels accurately in high-temperature environments without exposing instruments to excessive heat.
  7. Laboratory Equipment: Transfer liquids between containers at a constant flow rate in laboratory equipment.
  8. Oil and Gas Industry: Measure fluid levels and pressures in pipelines and storage tanks for safe operations in the oil and gas industry.

Price of syphon/Siphon pipes:

Type of Syphon Pipe Price Range (INR)
Small, Plastic/Bronze ₹100 – ₹1000
Medium, Brass/Stainless Steel ₹500 – ₹5000
Large, Stainless Steel ₹2000 – ₹15000
Bulk Orders (Discounted) Contact Supplier

Note: These prices are approximate and may vary depending on material, size, and supplier factors. For specific prices, Contact us.